Steel Racks

The Vantech H1 Rack System. The Cross bars is 2″ X 1″ rectangular 14 gauge heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are 4X 3/4″ eyehook per...

The Vantech H1 steel system uses 2″ X 1″ rectangular bars. The Cross bar is protected by a bar guard layer on top of the cross bars. The Mounting uprights base has an extra wide 8″ X 2″ extra wide base at 10.5″ total height. The Base is welded complete...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech H1 Rack System. This system uses 1″ X 2″ rectangular heavy duty bars. The Mounting uprights are 8″ extra wide base at 16.5″ total height. The Base is welded complete onto upright post for complete seal. There are four 3/4″ eyehook on each...

The Vantech Vantech RAM ProMaster Cargo Van H1 system. The Cross bars is 2″ X 1″ rectangular 14 gauge heavy duty. The Cross bar is protected by non-slip plastic bar guard on top. The Mounting uprights are 8″ extra wide base at 10.5″ total height. The...