Snow Removal

Spring kit contains two springs (finished in black powder coat paint), two eye bolts and lock nuts for both SP115 (square tube frame design) and SP120 (round tube frame design) models of 60, 72 and 82 inch plows.

Spring kit contains two springs (finished in black powder coat paint), two eye bolts and lock nuts for both SP115 (square tube frame design) and SP120 (round tube frame design) models of 88 inch plows.

Heavy duty skid shoes allows the height of the snowplow blade to be maintained thus permitting it to lift smoothly over uneven terrain including gravel and holes or cracks in concrete and asphalt. Includes all hardware and mounts to both the SP115...

Spring kit contains two springs (finished in black powder coat paint), two eye bolts and lock nuts for both SP115 (square tube frame design) and SP120 (round tube frame design) models of 84 inch plows.

The Electric Actuator Only for both the SP115 (square tube frame design) and SP120 (round tube frame design) models. The Actuator maintains 8 inches of stroke or lift with a clutch at both the bottom and top of stroke thus eliminating any potential over...

Allows the addition of a caster kit to a SP115 (square tube frame design) plow systems. Includes all necessary brackets (finished in black powder coat paint) and hardware, makes installing, removing and storage of the plow easier.

High visibility, nylon plow markers with ultra violet stabilizers. Markers provide increased visibility of snow plow blade edges . Includes two markers and hardware.

82 inch, SP115 (square tube frame design) snow deflector kit, includes rubber deflector, metal straps (finished in black powder coat paint) and hardware. Keeps snow from accumulating in grille, on headlamps, hood and windshield potentially impairing the...

Two piece steel construction provides structural support on the top and bottom of the 88 inch SP115 (square tube frame design) snow plow systems. Includes hardware. Finished in black powder coat paint.

Winch mounting plate for SP115 (square tube frame design) model of plows. Finished in black powder coat paint.

Replacement wired toggle switch to be used with control box when not utilizing the wireless remote control transponder. Toggle switch allows the lifting and lowering of both the winch lift systems as well as the actuator lift system.

Heavy duty nylon winch strap fits all generations of plows. 1 3/4 inches wide by 24 inches long.

Control box and wires for plows that are from 2009 and newer that utilize a Warrior, NWB300 or RTS3000 winch. This control box is needed if wanting to use the wireless hand held remote.

Complete wireless hand held remote that is compatible for plows from 2009 and newer. Includes hand held remote, 9 volt dry cell battery as well as transponder. Must be used with a three prong control box.

The complete winch kit includes, heavy duty nylon winch strap and controls for plows 2009 and newer. Uses four bolt mounting pattern.

Vehicle Specific Custom Mounts For DK2 Plows Hardware Included DK2 Custom mounts allow you to mount the newest generation of Detail K2 Snow Plows.  Each kit is custom-designed to fit and integrate easily into your truck or SUV.  You need to...